Filter
Top Products
5-24
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Chapter 5 Configuring the Client Adapter
Setting Security Parameters
Enabling Static WEP
Follow the steps below to enable static WEP for this profile.
Step 1 Choose Pre-Shared Key (Static WEP) on the Profile Management (Security) window.
Step 2 Click Configure. The Define Pre-Shared Keys window appears (see Figure 5-5).
Figure 5-5 Define Pre-Shared Keys Window
TKIP No settings required; automatically
enabled
Set up and enable WEP, set TKIP to
Cisco or check the Enable Per
Packet Keying check box, and set
Use Aironet Extensions to Yes
Broadcast key rotation Enable LEAP, EAP-FAST,
EAP-TLS, PEAP (EAP-GTC), or
PEAP (EAP-MSCHAP V2)
Set up and enable WEP and set
Broadcast WEP Key Rotation
Interval to any value other than
zero (0)
Table 5-4 Client and Access Point Security Settings (continued)
Security Feature Client Setting Access Point Setting