Filter
Top Products
4-6
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Chapter 4 Using the Profile Manager
Creating a New Profile
Figure 4-3 Profile Management (General) Window
Note If you are creating a profile after scanning for an available network, the SSID of the network
appears in the SSID1 field.
Step 5 Perform one of the following:
• If you want this profile to use the default values, click OK. The profile is added to the profiles list
on the Cisco Aironet Desktop Utility (Profile Management) window.
• If you want to change any of the configuration parameter settings, follow the instructions in
Chapter 5. The profile is added to the profiles list on the Cisco Aironet Desktop Utility (Profile
Management) window.
Note The profiles for PC-Cardbus cards are tied to the slot in which the card is inserted. Therefore,
you must always insert your PC-Cardbus card into the same slot, create profiles for both slots,
or export the profiles from one slot and import them for the other slot.
Step 6 Go to the “Including a Profile in Auto Profile Selection” section on page 4-7 to enable the profile to be
selected automatically or go to the “Selecting the Active Profile” section on page 4-9 to activate the
profile.