Filter
Top Products
E-10
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Appendix E Configuring the Client Adapter through the Windows XP Operating System
Configuring the Client Adapter
Step 15 Perform one of the following if you are planning to use EAP authentication:
• If you are planning to use EAP-TLS authentication, follow the instructions in the “Enabling
EAP-TLS Authentication” section on page E-10.
• If you are planning to use PEAP authentication, follow the instructions in the “Enabling PEAP
Authentication” section on page E-13.
Enabling EAP-TLS Authentication
Follow the steps below to prepare the client adapter to use EAP-TLS authentication, provided you have
completed the initial configuration.
Step 1 Click the Authentication tab on the Wireless Network Properties window. The following window
appears (see Figure E-3).
Figure E-3 Wireless Network Properties Window (Authentication Tab)