Filter
Top Products
F-3
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows
OL-4211-03
Appendix F Performing a Site Survey
Opening the Site Survey Utility
Opening the Site Survey Utility
To open the site survey utility, choose Start > Programs > Cisco Aironet > Aironet Site Survey Utility.
Note If you specified a different program folder during installation, you must access the site survey utility
from that folder.
Note The site survey utility is installed on your computer only if you checked the Install Site Survey Utility
check box during the installation of the client adapter software. If you did not check this check box and
want to use the site survey utility, uninstall the client adapter software and reinstall it, making sure to
check the site survey check box.
Selecting the Client Adapter
Note The site survey utility is supported for use with only CB21AG and PI21AG client adapters.
When the site survey utility starts, it scans for client adapters. If only one adapter is detected, it is
selected automatically. However, if the utility detects multiple adapters or no adapters, the Select
Adapter window appears (see Figure F-1).
Note You can manually open this window at any time to select a different client adapter. Simply choose Select
Adapter from the site survey utility’s Action drop-down menu.
Figure F-1 Site Survey Utility - Select Adapter Window