Filter
Top Products
6-11
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Chapter 6 Using EAP Authentication
Using LEAP or EAP-FAST with a Manually Prompted Login
The LEAP or EAP-FAST Authentication Status window appears.
Step 4 If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision
a PAC, click Ye s.
Step 5 If your client adapter authenticates, the window shows that each stage was successful and then
disappears. ASTU and the Link Status field on the ADU Current Status window show Authenticated.
If the authentication attempt fails, an error message appears after the authentication timeout period has
expired. Refer to the “Error Messages” section on page 10-12 for the necessary action to take.
After Your EAP-FAST Password Expires
If the EAP-FAST password for your current profile expires or becomes invalid, follow these steps to
change your password.
Step 1 When the Please Change Password window appears (see Figure 6-9) to indicate that your password is
invalid, enter your old password in the Old Password field.
Figure 6-9 Please Change Password Window
Step 2
Enter your new password in both the New Password and Verify New Password fields.
Step 3 Click OK. The client adapter should authenticate using your new password.