Filter
Top Products
1-8
Installation Guide for Cisco Unified Service Monitor
OL-25111-01
Chapter 1 Prerequisites
Port Usage
The Local Security Policy window appears.
Step 2 Click Local Polices > Security Options.
Step 3 Select System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing.
Step 4 Right-click the selected policy and click Properties.
Step 5 Select Enabled or Disabled to enable or disable FIPS compliant algorithms.
Step 6 Click Apply.
You must reboot the server for the changes to take effect.
Port Usage
Before you install Service Monitor, ensure that the ports listed in Table 1-3 and Table 1-4 are free.
Note The ports in Table 1-3 and Table 1-4 should not be scanned.
Table 1-3 lists the ports that Service Monitor uses. Common Services is installed with Service Monitor.
Table 1-4 lists the ports that Common Services uses.
Note Service Monitor uses TFTP to find the configuration file for a given Cisco 1040. Service Monitor by
default uses port 69 on the TFTP servers.
Common Services is also installed on the Service Monitor system. Table 1-4 lists the ports used by
Common Services.
Table 1-3 Service Monitor Port Usage
Protocol Port Number Service Name
TCP 22 SFTP—Service Monitor uses SFTP to obtain data from Unified
Communications Manager versions 5.x and later.
UDP 53 DNS.
UDP 67 and 68 DHCP.
TCP 2000 SCCP—Service Monitor uses SCCP to communicate with Cisco 1040s.
TCP 43459 Database.
UDP 5666 Syslog—Service Monitor receives syslog messages from Cisco 1040s.
TCP 5665–5680 Interprocess communication between the user interface and back-end
processes.
These ports must be free.