Filter
Top Products
A-2
Installation Guide for Cisco Unified Service Monitor
OL-25111-01
Appendix A User Inputs for Installation, Reinstallation, and Upgrade
User Inputs for Custom Installation
Table A-2 lists information you need to enter during an upgrade installation in Typical mode.
Table A-3 lists information you need to enter while reinstalling in Typical mode.
User Inputs for Custom Installation
Table A-4 lists the information you must enter while installing for the first time in Custom mode.
Password for casuser The password is generated randomly if you leave the field blank.
Mail Settings:
• HTTPS port
• Administrator’s e-mail
address
• SMTP server name
Note Appears if IIS was detected on your system, and you indicated
that you would like to avoid port conflict between IIS and Service
Monitor by reconfiguring the default HTTPS port. Otherwise,
Mail Settings appears only during a Custom installation.
The default values are:
• Port number 443—Enter a value from the range that is displayed.
• admin@domain.com.
• localhost name.
Table A-1 User Inputs for New Installation: Typical (continued)
Settings Value
Table A-2 User Inputs for Upgrade Installation: Typical
Settings Value
Password for casuser
account
The password is generated randomly if you leave the field blank. (See
Fixing Problems That Can Occur After You Change Passwords,
page A-7.)
Applications to install Select the applications you want to install.
Table A-3 User Inputs for Reinstallation: Typical
Settings Value
Password for casuser
account
The password is generated randomly if you leave the field blank. (See
Fixing Problems That Can Occur After You Change Passwords,
page A-7.)
Applications to install Select the applications you want to install.
Table A-4 User Inputs for a New Installation: Custom
Settings Value
Destination folder The default location is System drive:\Program Files\CSCOpx. Select another
location if you want to install in a specific location. We recommend that you
specify a short path for the destination folder.
Applications to
install
Select the applications you want to install.