Filter
Top Products
C-4
Installation Guide for Cisco Unified Service Monitor
OL-25111-01
Appendix C Security Configuration with Cisco Secure ACS
Changing the AAA Mode to ACS in Common Services
For details about how to perform each of the previous tasks, see the Common Services online help.
Changing the AAA Mode to ACS in Common Services
Before you perform this procedure, complete the tasks in Configuring the System Identity User in
Common Services, page C-3 and Setting Up the Cisco Secure ACS Server, page C-3.
Step 1 Select Administration > Server Administration (Common Services) > Security > AAA Mode Setup.
The AAA Mode Setup page appears.
Step 2 Next to Select a Type, select the ACS radio button. The page refreshes, displaying appropriate options.
Step 3 Under Server Details, enter an IP address for the Cisco Secure ACS server and enter a port.
Step 4 Under Login, enter:
• ACS Admin Name—Enter the name of the administrator you created in step 1. (See Setting Up the
Cisco Secure ACS Server, page C-3.)
• ACS Admin Password—Enter the password for the administrator you created in step 1. (See Setting
Up the Cisco Secure ACS Server, page C-3.)
• ACS Shared Secret Key— Enter the shared secret you entered when you added the Service Monitor
server to Cisco Secure ACS as a AAA client in step 2. (See Setting Up the Cisco Secure ACS Server,
page C-3.)
Step 5 Decide whether to select Register all installed applications with ACS.
Note If Service Monitor is registered with ACS and you register it again, you lose any custom roles
that were previously configured in Cisco Secure ACS for Service Monitor. The same is true for
Common Services. (To selectively register an application, see Registering an Application to
Cisco Secure ACS from the Command Line, page C-5.)
Step 6 Select the appropriate radio button (HTTP or HTTPS) under Current ACS Administrative Access
Protocol.
Step 7 Click Apply to complete the mode change. An ACS verification status message is displayed; do one of
the following:
• Click OK—Registers Service Monitor and Common Services tasks and users to ACS; overwrites
any existing custom roles for Service Monitor and Common Services.
• Click Cancel—Prevents registration to ACS from occurring.