Filter
Top Products
C-5
Installation Guide for Cisco Unified Service Monitor
OL-25111-01
Appendix C Security Configuration with Cisco Secure ACS
Assigning Roles to Users and User Groups in Cisco Secure ACS
Step 8 Restart the daemon manager for the changes to take effect. From the command line, enter these
commands:
net stop crmdmgtd
net start crmdmgtd
Registering an Application to Cisco Secure ACS from the Command Line
A script, <NMSROOT>\bin\AcsRegCli.pl, enables you register applications to Cisco Secure ACS.
Note NMSROOT is the directory where Service Monitor is installed. If you chose the default, it is
C:\PROGRA~1\CSCOpx.
Following are the available parameters when running the script from the CLI:
AcsRegCli.pl -register <application name>
Replace application name with any of the following:
• qovr—Registers Service Monitor only
• cmf—Registers Common Services only
• all—Registers all applications on the server (Cisco Unified Service Monitor and Common Services).
Assigning Roles to Users and User Groups in Cisco Secure ACS
You must ensure that the System Identity User in Cisco Secure ACS is assigned all roles and that
Common Services users or user groups have been assigned the proper privileges.
In Cisco Secure ACS, select Shared Profile Components > Cisco Unified Service Monitor. For more
information, see these documents:
• User Guide for Cisco Secure Access Control Server 4.x
• Common Services online help. Look for these topics:
–
Roles in ACS
–
Assigning Roles to Users and User Groups in ACS
Verifying the Service Monitor and Cisco Secure ACS
Configuration
After performing the tasks beginning with Assigning Roles to Users and User Groups in Cisco Secure
ACS, page C-5 through Configuring the System Identity User in Common Services, page C-3, verify the
configuration as follows:
1. Log in to Service Monitor with a username defined in Cisco Secure ACS.
2. Try to perform tasks, to ensure that you can perform only those tasks that you are entitled to perform
based on the role assigned to you in Cisco Secure ACS.