Filter
Top Products
A-5
Installation Guide for Cisco Unified Service Monitor
OL-25111-01
Appendix A User Inputs for Installation, Reinstallation, and Upgrade
User Inputs for Custom Installation
Table A-6 lists the information you must enter while reinstalling in Custom mode.
Note If you have Service Statistics Manager installed and you change either of the following:
• The password for the user admin
• The destination location (the directory in which Service Monitor is installed)
Service Statistics Manager stops collecting data from Service Monitor. You can reenable data collection
by performing the procedures that are documented in Release Notes for Cisco Unified Service Statistics
Manager 1.3.
Mail Settings:
(Optional)
• HTTPS port
• Administrator’s
e-mail address
• SMTP server
name
You can choose to keep the existing information.
Data for the
Self-signed
Certificate:
(Mandatory)
• Country Code
• State
• City
• Organization
• Organization
Unit Name
• E-mail Address
You can change the Self-signed certificate information. By default, the
installation program uses the existing self-signed certificate information.
If you want to generate a new certificate, uncheck the Keep Existing Certificate
check box, and enter the country code, state, city, company, organization, and
host name for HTTPS.
You must enter the host name. You can leave the other fields blank.
Note Common Services allows you to create security certificates to enable
SSL communication between your client browser and management
server. Self-signed certificates are valid for five years from the date of
creation. When the certificate expires, the browser prompts you to
install the certificate again from the server where you have installed
Common Services. In Typical mode, this certificate is automatically
generated.
Table A-5 User Inputs for an Upgrade Installation: Custom (continued)
Settings Value
Table A-6 User Inputs for Reinstallation: Custom
Settings Value
Destination folder The default location is System drive:\Program Files\CSCOpx.
We recommend that you specify a short path for the destination folder.
Password for users
admin and guest
(Optional)
You can change the passwords for the admin and guest users. To keep the
existing passwords, leave the fields blank.
(If you change the password for the admin user, see Fixing Problems That Can
Occur After You Change Passwords, page A-7.)