Filter
Top Products
DCSE: PowerEdge 1550 Self-Study Version 0.3, 4 December, 2000
Page 40 Dell
Installing the Cable Management Arm
Follow this procedure to install the PowerEdge 1550 cable management
arm into the rack.
# Installing the Cable management Arm
12. Before installing the cross brace you must install the following:
• Mounting rails.
• Cross brace.
13. Perform the following steps to installing the cable management arm:
• Locate the screw hole in the right hand side of the support bracket; this is where one of the
thumbscrews on the cable management arms secures. It is shown in the picture that
follows by a red circle.