Filter
Top Products
Version 0.3, 4 December, 2000 DCSE: PowerEdge 1550 Self-Study
Dell Page 59
# Removing a Processor or a Terminator.
55. • Repeat this procedure for the second processor or the terminator if applicable.
Removing the System Board
Follow this procedure to remove the system board.
# Removing the System Board.
56. Before removing the system board you must remove the following:
• The top cover.
• The memory.
• The processor(s).
57. To remove the system board, perform the following steps:
• Disconnect any wires that are connected to the system board.
58. • Loosen the thumbscrew.