Filter
Top Products
224 Dell Printer Configuration Web Tool
NOTE: The settings in the Port Settings page will be valid only when the printer
is rebooted. When you change or configure the settings, click the Apply New
Settings button to apply the new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
TCP/IP
Settings
IP Mode Sets the IP mode.
Host Name Sets the host name.
IPv4 IP Address
Mode
Sets the method for acquiring the IP
address.
Manual IP
Address
When an IP address is being set manually,
the IP is allocated to the printer using the
format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the
range of 0 to 254. 127 and any value in the
range of 224 to 254 cannot be specified for
the first octet of a gateway address.
Manual Subnet
Mask
When an IP address is being set manually,
the subnet mask is specified using the
format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the
range of 0 to 255. 255.255.255.255 cannot
be specified as the subnet mask.
Manual
Gateway
Address
When an IP address is being set manually,
the gateway address is specified using the
format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the
range of 0 to 254. 127 and any value in the
range of 224 to 254 cannot be specified for
the first octet of a gateway address.