Filter
Top Products
Dell Printer Configuration Web Tool 227
To configure the IP Filter feature, enter an IP address to be filtered in the
Address field and the Subnet Mask in the Address Mask field. Enter a numeric
value between 0 and 255 in each field. "*" is appended to the current value.
IP Filter Setup Procedure
You can set up to a maximum of five items and the first item set takes priority.
When setting multiple filters, enter the shortest address first followed by a
slightly longer address, a longer address and so on.
Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the
"192.168.100.10" IP address.
1
Click the first column of the
Access List
row
1
.
2
Enter "
192.168.100.10
" in the
Address
field and
"
255.255.255.255
" in the
Address Mask
field.
3
Select
Permit
.
4
Click
Apply New Settings
.
Disabling Printing From a Specified User
The following describes the procedure to disable printing only from the
"192.168.100.10" IP address.
Network
TWAIN
Connection
Time-Out
Sets the connection time-out period between 1 and 65,535
seconds.
HTTP Port Number Sets the port number to 80 or from 8,000 to 9,999.
Simultaneous
Connections
Displays the maximum number of simultaneous
connections.
Connection
Time-Out
Sets the connection time-out period from 1 to 255 seconds.
Telnet Password Sets the password for Telnet.
Re-enter
Password
Confirms the set password.
Connection
Time-Out
Sets the connection time-out period from 1 to 1,000 seconds.
Update
Address
Book
Connection
Time-Out
Sets the connection time-out period from 1 to 65,535
seconds.