Filter
Top Products
Installing Optional Accessories 83
NOTE: If your computer provides a wireless adapter tool, change the
wireless settings using this tool. Or you can change the wireless settings using
the tool provided with the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a
Select Network Connections from Control Panel.
b
Right-click
Wireless Network Connection
and select
Properties
.
c
Select
Wireless Network
tab.
d
Ensure the check box for
Use Windows to configure my wireless
network settings
is checked.
e
Click
Advanced
.
f
Do either of the following:
When wireless ad-hoc mode is set to the printer:
Select
Computer to Computer
(ad hoc) networks only and close the
Advanced
dialog box.
When wireless infrastructure mode is set to the printer:
Select
Access point (Infrastructure) networks only
and close the
Advanced
dialog box.
g
Click
Add
to display
Wireless network properties
.
h
Enter the setting that you will send to the printer and click
OK
.
i
Click
Move up
to move the setting to the top of the list.
j
Click
OK
to close the
Property
dialog box.
For Windows Vista:
a
Open
Control Panel
.
b
Select
Network and Internet
.
c
Select
Network and Sharing Center
.
d
Select
Connect to a network
.
e
Select the setting you send to the printer from the network items listed in
Connect to a network
.
f
Select
Connect Anyway
in the warning dialog box indicating you are
entering an unsecured area.