Filter
Top Products
Removing and Replacing Parts 4-19
([SDQVLRQ&DUGV
NOTE: PCI cards are
not
hot-pluggable under the Microsoft
®
Windows NT
®
4.x
operating system. Hot-plug capability should become available under future
operating systems.
To remove an expansion card, follow these steps:
1. Open the right panel door on top of the computer (see
Figure 4-15).
2. Disconnect any cables attached to the expansion card you want to remove.
Be sure to record the location of each cable before you disconnect it.
expansion card
release tab
expansion-
card latch
card guide (thumb latch type)
card guide (squeeze
latch type)