4-20 Dell PowerEdge 6350 Systems Service Manual
3. For the card you want to remove, press in and hold the clip on the back of
the computer. At the same time, from inside the computer, press down on
the curved release tab in the middle of the expansion-card latch. After the
release tab clicks into the latch cutout, rotate the latch away from the
expansion-card bracket.
4. Depending on the type of card guide your system uses for the inner end of
the expansion card, use one of the following methods to release the guide
latch:
For card guides with a thumb tab
, rotate the tab outward (away from
the expansion card) to release the latch.
For card guides with a squeeze latch,
squeeze and rotate the top of the
card guide to release the latch.
5. Grasp the expansion card by the corners, and carefully remove it from the
expansion-card connector.
6. If you are removing the card permanently, install a metal filler bracket over
the empty card-slot opening.
clip