Filter
Top Products
System Setup Program A-3
Time Resets time on computer’s internal clock.
Date Resets date on computer’s internal calendar.
Diskette Drive A
Diskette Drive B
Identifies type of diskette drive installed. (Note
that the PowerEdge 6350 supports only one
internal diskette drive.)
Cache Sets the state of the processor cache to On
(default) or Off.
Num Lock On 101- and 102-key keyboards, determines
whether system boots with Num Lock
activated.
Speaker Determines whether the integrated speaker is
On (default) or Off.
OS Install Mode Determines the maximum amount of memory
available to the operating system. When set to
On, the maximum amount available is
256 MB; when set to Off (the default), all
system memory is available to the operating
system.
Processor 1
Processor 2
Processor 3
Processor 4
Displays version or stepping number of the
microprocessor in each processor slot on the
system board.
Keyboard Errors Enables or disables reporting of keyboard
errors during POST.
Boot Sequence Determines whether system boots from
diskette (if present) or hard-disk drive.
Scan Sequence Determines the order in which the PCI devices
are scanned by the system.
System Password Displays current status of system’s password
security feature. Also used to assign and
verify a new password.
Password Status If set to Locked, prevents the system
password from being changed or disabled.
Requires that Setup Password category be
Enabled.
Setup Password Restricts access to System Setup program.
Mouse Enables or disables the integrated PS/2-
compatible mouse port.