Filter
Top Products
2. Firmly grasp the paper, and then gently pull it from the printer.
3. Close the ADF cover.
4. Press the Select button
.
5. Resend your print job to print any missing pages.
Printing Problems
Check the ink levels, and install new print cartridges if necessary.
For more information, see Replacing Ink Cartridges.
Make sure you remove individual sheets from the paper exit tray.
To avoid ink smudging when you are using the following media, remove each sheet as it exits, and
allow it to dry:
Photo paper
Glossy paper
Transparency
Labels
Envelopes
Iron-on transfers
Extend dry time when duplexing print jobs
If ink is smeared on the bottom of the pages of your duplex print jobs, extend the time for the printed
side to dry before the duplex unit feeds the paper back into the printer, and prints on the other side.
NOTE: You will need to wait a few seconds longer for your duplex print jobs to finish if you turn this
feature on.
To make this feature a default for all duplex print jobs:
1.
In Windows Vista
:
a. Click ® Control Panel.