Filter
Top Products
Wireless Menu
You can view or change the settings in the Wireless Setup Menu by selecting Wireless Menu from the
Network Setup menu.
TCP/IP Menu
You can view or change the settings in the TCP/IP Menu by selecting TCP/IP from the Network
Setup menu.
* Factory default setting
From the Network Time Menu, press the left or right Arrow button to enable or
disable the Time Server, and then press the Back button to save the settings.
NOTE: When Time Server is enabled, the wireless Ethernet card updates the
printer's time once a day or every time the printer is powered on.
Active Network Specify which network connection the adapter should use.
Auto*
Ethernet 10/100
Wireless 802.11b/g
Menu item Settings
* Factory default setting
Network Name Reflects the current SSID being used.
NOTE: You cannot change the value of Network Name.
Wireless Signal Quality Press the Select button
to view the current signal quality.
Menu
item
Settings
Enable
DHCP
Specify whether or not your network automatically assigns IP settings.
Yes*
No
NOTE: You cannot change or set an IP Address, IP Netmask, and IP Gateway if DHCP is
enabled.
Set IP
Address
Press the Select button
to enter the Set IP Address menu.
From the Set IP Address menu, use the keypad to enter an IP address. Press the right
Arrow button
to enter a set of numbers in the next field, or press the left Arrow button
to erase an entry. Press the Back button to save the settings.
NOTE: The IP address cannot be changed if DHCP is enabled.
Set IP
Netmask
Press the Select button to enter the Set IP Netmask menu.