Filter
Top Products
104 | Set up Network Discovery
Network Discovery
Activate your proposed changes
The Activate Changes page allows you to review all the changes you have
proposed for Network Discovery network configuration before actually making
those changes take effect.
Note: Changes to network configuration do not take effect if you do not
activate them.
To activate changes
1 Click Administration > Network configuration > Activate changes.
A table appears, detailing all the changes you proposed in this session.
Network Discovery tells you how many potential devices it will have to
explore, and how long it will take.
Also, you will be told of any configuration problems detected by Network
Discovery. You can ignore the warnings, but do so at your own risk.
2 Review the changes to make sure the new configuration is correct.
If you decide to implement the changes you have made, activating the
changes will update your network configuration.
3 Click Activate changes.
All of the changes you proposed are now the current settings and Network
Discovery will perform active discovery on the IPv4 ranges you have set up.
Check that it’s working
There are a couple of things you can do to make sure Network Discovery is up
and running properly. If you are unsure of why some devices are appearing, and
other devices are not appearing, here are some suggestions to help you
investigate.