Filter
Top Products
90 | Appliance Management
Network Discovery
To enable or disable the UPS warning
1 Click Administration > System preferences > Display warnings.
2 For UPS warnings enabled, click Yes or click No.
3 Click Change.
Disabling modem warnings
Network Discovery generates warnings if it does not detect an internal modem.
If you have chosen to receive customer support through the Internet, over a
Virtual Private Network or over a Remote Access Server, you can disable this
modem warning.
To enable or disable the modem warning
1 Click Administration > System preferences > Display warnings.
2 For Modem warnings enabled, click Yes or click No.
3 Click Change.
Disabling backup warnings
We strongly recommend that you configure a backup of your Network
Discovery data. For that reason, if Network Discovery detects that you have
configured a backup and detects that it has not successfully completed a
backup within the past 25 hours, Network Discovery will create a warning
condition for Appliance Health (visible at the bottom of the Health Panel).
If you have not configured a backup, you will not receive a warning. The default
is Yes. You can turn this warning off.
To enable or disable the backup warning
1 Click Administration > System preferences > Display warnings
2 For Backup warnings enabled, click Yes or click No.
3 Click Change.