Filter
Top Products
Set the BIOS boot sequence | 53
Setup Guide
13 Use the arrow keys to select Console Redirection and press Enter.
14 Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
Console Redirection Off
Note: All other BIOS settings do not affect Network Discovery and can be set as
you prefer (including asset tags, keyboard and security preferences, etc.).
HP Hardware
For the HP DL360/DL380, you need to change its default Hard Drive settings,
and the OS selection. By default, the server might be configured to see its two
drives as one large logical drive. For Network Discovery to function properly,
you need to reconfigure the options, so your server will appear to have two
logical drives.
To configure the logical drives
After you power the server on, wait until the display shows Press F8 for ROM
Configuration Options.
1 Press F8.
2 Use the arrow keys to go to Delete Logical Drive and press Enter.
3 Press F8 to delete the logical drive.
A warning screen appears.
4 Press F3 to confirm the delete.
A progress message appears that says “Saving Configuration.”
5 When the configuration is saved, press Esc to return to the main menu.
6 Use the arrow keys to go to Create Logical Drive.
7 Under Available Physical Drives, select only one.
8 Under RAID Configuration, select RAID 0.