Filter
Top Products
Extra Hardware | 157
CHAPTER
C
Extra Hardware
The following hardware is not supplied with the Peregrine appliance but is
either required to provide extra functionality or is recommended.
Note: To connect all three pieces of equipment—a UPS, backup equipment and
pager hardware—attach a Universal Serial Bus (USB) hub.
Uninterruptible Power Supply (UPS) units
Used for
Protection against electrical service interruptions and fluctuations.
Note: Use of a UPS is strongly recommended. By default, if Network Discovery
does not detect a UPS, it will issue a constant warning about the health of
the Peregrine appliance.
Requirements
Any Smart-UPS, Back-UPS, or Back-UPS Pro UPS with a minimum rating of
1000VA and a USB connector. The connector must be USB.
Acceptable UPS units
A qualified UPS must be purchased separately by the user. Network Discovery
will support any American Power Conversion Corporation UPS with a minimum
rating of 1000VA and a USB connector.