Filter
Top Products
Set the BIOS boot sequence | 51
Setup Guide
Embedded SCSI Controller SCSI
IDE CD-ROM Controller Auto
Diskette Controller Auto
USB Controller On without BIOS support
Embedded GB NIC 1 + 2 On
NIC 1 PXE Disabled
NIC 1 PXE Disabled
Serial Port 1 COM1
16 Press Esc.
You see the Main menu again.
17 Use the arrow keys to select Console Redirection and press Enter.
18 Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
Console Redirection Off
Note: All other BIOS settings do not affect Network Discovery and can be set as
you prefer (including asset tags, keyboard and security preferences, etc.).
For the Dell 1650
To set the BIOS boot sequence
In the setup, use the up and down keys to select the items and the right and left
keys to configure the options.
After you power the server on, wait until the display shows Press F2 for
Configuration/Setup.
1 Press F2.
You see the Main menu.
2 In the main menu, make sure the Item “OS Install Mode” is set to “Off.”
3 Use the arrow keys to select Boot Sequence and press Enter.
4 Press Enter again.