Filter
Top Products
50 | Install and Start Network Discovery
Network Discovery
5 Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
Logical Processor Enabled
Sequential Memory Access Disabled
6 Press Esc.
You see the Main menu again.
7 Use the arrow keys to select Boot Sequence and press Enter.
8 Press Enter again.
9 Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
1. CD-ROM Device
2. Hard Drive C:
3. Embedded Primary MBA v6.2.6 Slot 0200
4. Diskette Drive A:
10 Press Esc.
You see the Main menu again.
11 Use the arrow keys to select Hard-Disk Drive Sequence and press Enter.
12 Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
1. Embedded #428 10X0,A:00
2. System BIOS boot devices
13 Press Esc.
You see the Main menu again.
14 Use the arrow keys to select Integrated Devices and press Enter.
15 Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.