Filter
Top Products
Set up the IPv4 range(s) to discover | 97
Setup Guide
Note: The list of community strings must be separated by commas (for example,
“public,private,string1,string2”).
3 Click Change.
Note: Hop 0 (zero) is always the Peregrine appliance itself, and hop 1 is always
the default gateway.
Run Router Discovery
1 Click Administration > Router discovery > Run router discovery.
2 Click Confirm.
You will receive an e-mail confirmation when Network Discovery has completed
the router discovery process. At that point, you can apply the results to your IPv4
range.
Apply the Router Discovery results to your IPv4 Range
1 Click Administration > Router discovery > Router discovery results.
2 Choose a property set for each discovered router (typically, you should
choose the “Active Discovery” option).
3 Click Add to IPv4 Ranges.
Set up the IPv4 range(s) to discover
As soon as you entered the IPv4 address of the Peregrine appliance, Network
Discovery automatically determines the subnet in which the Peregrine
appliance resides. It may have suggested a range that is either too big or too
small. Take a look at the suggested IPv4 range.