Filter
Top Products
86 | Appliance Management
Network Discovery
Note: Seconds are not set explicitly. When you click the Set Time button,
seconds are set to 0.
To set the time and date
1 Make sure the time zone is set (see Set the time zone on page 78).
2 Click Administration > Appliance management > Set time.
3 Enter the Year, Month, Day, Hours, and Minutes in the appropriate fields.
4 Click Change Time.
Synchronize the time
This procedure synchronizes the time used by Network Discovery with the time
on another machine that uses the Network Time Protocol (NTP).
Either set the time or synchronize the time, not both.
Note: The Synchronize Time option only synchronizes the time once. It does not
repeatedly re-synchronize.
To synchronize the time
1 Make sure the time zone is set (see Set the time zone on page 78).
2 Click Administration > Appliance management > Synchronize time.