Filter
Top Products
WRVS4400N User Guide 98
L2 Switch Tab
Setting Up and Configuring the Router
RADIUS
RADIUS mode provides authentication on devices connecting to the LAN ports. It requires
installation of a RADIUS server on your local network.
Mode—Select Enabled or Disabled, as desired.
RADIUS IP—Enter the RADIUS server IP address.
RADIUS UDP Port—Identifies the UDP port. The UDP port is used to verify the RADIUS server
authentication.
RADIUS Secret—Indicates the Key string used for authenticating and encrypting all RADIUS
communications between the Wireless Router and the RADIUS server. This key must match the
RADIUS server’s configuration.
Administration State—Specifies if each port needs RADIUS authentication. The defaults are
Force Authorized so no authentication is needed. The possible field values are:
• Auto—Controlled port state is set by the RADIUS Mode.
• Force Authorized—Controlled port state is set to Force-Authorized (forward traffic). All
connections can be made.
• Force Unauthorized—Controlled port state is set to Force-Unauthorized (discard
traffic). All connections are blocked.
Change these settings as described here and click Save Settings to apply your changes, or click
Cancel Changes to cancel your changes. Help information is displayed on the right-hand side
of the screen, and click More for additional details.