Filter
Top Products
WRVS4400N User Guide 54
Wireless Tab
Setting Up and Configuring the Router
Wireless Connection Control
Configure the Connection Control List to either permit or block specific wireless client devices
connecting to (associating with) the Wireless Router.
Select SSID—Select the desired SSID.
Enabled/Disabled—Enable or disable wireless connection control. The default is Disabled.
Connection Control
There are two ways to control the connection (association) of wireless client devices. You can
either prevent specific devices from connecting to the Wireless Router, or you can allow only
specific client devices to connect to the Wireless Router. The client devices are specified by their
MAC addresses. The default is to allow only specific client devices.
Connection Control List
MAC 01-20—Enter the MAC addresses of the wireless client devices you want to control.
Wireless Client List—Instead of manually entering the MAC addresses of each client, the
Wireless Router provides a convenient way to select a specific client device from the client
association table. Click this button and a window appears to let you select a MAC address from
the table. The selected MAC address will be entered into the Connection Control List.
Change these settings as described here and click Save Settings to apply your changes, or click
Cancel Changes to cancel your changes. Help information is displayed on the right-hand side
of the screen.