Filter
Top Products
WRVS4400N User Guide 107
7
Before You Begin
VPN Setup Wizard
VPN Setup Wizard
Now you can configure a gateway-to-gateway VPN tunnel between two VPN routers in a fast
and efficient way by using the VPN Setup Wizard. The VPN Setup Wizard works with users
running Microsoft Windows 2000, XP, and Vista. This document describes how to run the VPN
Setup Wizard.
Before You Begin
The VPN Setup Wizard works with the following routers:
• Linksys RVS4000 4-Port Gigabit Security Router with VPN
• Linksys WRVS4400N v1.1 Wireless-N 4-Port Gigabit Security Router with VPN
• Linksys WRVS4400N v2 Wireless-N 4-Port Gigabit Security Router with VPN
Use the following instructions to configure required data using the Web Administrator
Interface. For instructions on the Web Administrator Interface, see the User Guide for your
router.
1. Click the Firewall > Basic Settings tab.
2. Enable Remote Management and enter 8080 in the Port field. Please note that you cannot
enter any other value if you want to use the VPN Wizard. Also, make sure that HTTPS has
been selected.
3. Click Save Settings.
4. Click the VPN > Summary tab and make sure the Tunnel(s) available are not zero.
5. Ensure that the LAN IP addresses of routers with VPN are in different subnets in order for the
VPN connection to work.
NOTE: The VPN Setup Wizard assumes that no firewall/
NAT device sits in front of the VPN router.