Filter
Top Products
WRVS4400N User Guide 33
Setup Tab
Setting Up and Configuring the Router
the number of minutes you want to have elapsed before your Internet connection terminates
in the Max Idle Time field. Use this option to minimize your DSL connection time if it is charged
based on time. This option is disabled by default.
Keep Alive Redial period—If you select this option, the Router will periodically check your
Internet connection. If you are disconnected, then the Router will automatically re-establish
your connection. To use this option, click the option next to Keep Alive. In the Redial Period
field, you specify how often you want the Router to check the Internet connection. This option
is enabled by default and the default Redial Period is 30 seconds. Use this option to minimize
your Internet connection response time since it will always be connected.
Heart Beat Signal
Heart Beat Signal is a service used in Australia. Check with your ISP for the necessary setup
information.
User Name and Password—Enter the User Name and Password provided by your ISP.
Heart Beat Server—Enter the IP address of the Heart Beat server.
Connect on Demand: Max Idle Time—Configure the Router to cut the Internet connection
after it has been inactive for a specified period of time (Max Idle Time). If your Internet
connection has been terminated due to inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you attempt to access the Internet again.
If you wish to activate Connect on Demand, click the Connect on Demand option and enter
the number of minutes you want to have elapsed before your Internet connection terminates
in the Max Idle Time field. Use this option to minimize your DSL connection time if it is charged
based on time. This option is disabled by default.
Keep Alive Redial period—If you select this option, the Router will periodically check your
Internet connection. If you are disconnected, then the Router will automatically re-establish