Filter
Top Products
WRVS4400N User Guide 27
How to Navigate the Utility
Setting Up and Configuring the Router
IPS
Use this tab for advanced configuration on built-in Intrusion Prevention System (IPS) inside the
Router.
• Configure—Enable or disable IPS functions.
• P2P/IM—Allows or blocks specific Peer to Peer (P2P) networks and Instant Messaging
(IM) applications.
• Report—Provides reports of network traffic and malicious attacks.
• Information—Provides the signature file version and the Protection Scope of the IPS
system.
L2 Switch
Use this tab to configure layer 2 switching features on the 4 port Ethernet Switch (LAN ports
only).
• Create VLAN—Create a Virtual Local Area Network (VLAN) assignment.
• VLAN & Port Assignment—Virtual Local Area Network (VLAN) and Port settings.
• RADIUS—Configuration of Remote Authorization Dial-In User Service (RADIUS) settings.
• Port Setting—Configuration of port speeds and duplex.
• Statistics—Displays statistics for both received and transmitted packets.
• Port Mirroring—Allows configuration of port mirroring.
• RSTP—Used for RSTP (Rapid Spanning Tree Protocol) configuration.
Status
Use this tab to get the current status on the Router.
• Gateway—Provides basic information like firmware version and status information on
the WAN port.
• Local Network—Provides status information about the local network (four Ethernet
Ports).
• Wireless LAN—Provides status information on Wireless LAN.
• System Performance—Provides traffic statistics on LAN and Wireless LAN ports.