Filter
Top Products
DI-1162/DI-1162M Remote Access Router
103
The parameters are described as follows:
♦
IP Address –
This is the IP Address of the device that the router will attempt to reach. The router will check it
routing table and try to locate the IP Address.
♦
Count –
The number of pings (packets) that will be sent.
♦
Delay (10ms) –
The amount of time in 10 millisecond intervals between each ping in the Count.
♦
Start Ping Test -
Press <Enter> or <Return> to begin the test.
IPX Ping Test
This test makes sure there is an IPX network connection to a particular IP address (DI-1162M only).