Filter
Top Products
DI-1162/DI-1162M Remote Access Router
67
Select an entry from above and hit <Enter>. This screen will be blank if an IPX filter has not been configured yet.
The IPX Filter parameters are described below:
♦
Name –
This is a 12 character (maximum), alphanumeric, user-defined name, used to identify the IPX filter.
♦
State –
This is used to define the routing decision applied to the packet. The three routing decisions are
described:
1.
Forward
–
This allows the routing of the packet, if it has met the criteria of the corresponding IPX filter.