Filter
Top Products
DI-1162/DI-1162M Remote Access Router
31
♦
Stub Area
– Toggle between
Yes
and
No
. AS external advertisements are not flooded into/throughout stub
areas. Routing to AS external destinations in these areas is based on (per area) default only.
♦
Stub Default Cost (0. . 255)
– Enter a Stub Default Cost between 0 and 255 in this field.
♦
State
– This enables or disables a particular entry.
♦
Address Ranges
– Enter the Range Net, Range Mask, Advertisement status, and
Enable
the State of up to five
OSPF entries in these fields. This allows users to manually enter OSPF subnet information. Range Net and
Range Mask describe the collection of IP addresses contained in the range. Networks and hosts are assigned to
an area depending on whether their addresses fall into one of the area’s defining address ranges.
Advertisement is set to either
Yes
or
No
. Routing information of these address ranges is advertised external to
the area if and only if such status is set to
Yes
.
OSPF Intf. Configuration
Select the desired interface on the
OSPF Intf. Configuration
screen:
Complete the OSPF interface configuration information on the screen below: