Filter
Top Products
DI-1162/DI-1162M Remote Access Router
75
Configure NAT/NAPT
The first screen shows the complete NAT table that is defined by the network manager:
For any NAT entry, you must configure two different screens. The first one is accessible by positioning the cursor
over the name field and hitting <Enter> (in the window shown above, this corresponds to the field ‘02507’). After
configuring the NAT options in the Name field, you must save the changes, exit, and position the cursor over the
NAT IP Pool to configure variables there.
Name Field Configuration Screen
The configuration screen for the name field appears as follows: