DI-1162 Remote Access Router
82 Configuration and Management
you must save the changes, EXIT, and position the cursor over the
NAT IP Pool to configure variables there.
Name Field Configuration Screen
The configuration screen for the name field appears as follows:
The parameters are described as follows:
•
Name – this is a 12 character, alphanumeric, user-defined name,
used to identify the network address translation.
•
Global Interface – this is the interface corresponding to the
Global IP
and
Range
parameters, in the NAT table, to form unique
IP address[es], known to the outside (regional or Internet) routers,
on this interface.
•
Local Interface – this is the interface corresponding to the
Local
IP
and
Range
parameters, in the NAT table, to form local IP
address[es], known only to this interface and the network within.
•
Translation Mode – this toggles choices of four types of NATs.
