Filter
Top Products
DI-1162/DI-1162M Remote Access Router
42
SNMP Community Configuration
Select and enter the
SNMP Community Configuration
submenu. You will see the following configuration
screen:
The parameters are described below:
♦
SNMP Community String
– This community string is a user-defined identifying name used to group together
some arbitrary set of SNMP application entities managed by the network manager.
♦
Access Right
– This element of the set (
Read Only
,
Read/Write
) is called the SNMP access mode. If the
SNMP Community String has an Access Right of
Read/Write
, then that Community String is available as an
operand for the
get
,
set
, and
get next
operations. Otherwise, if the Community String’s corresponding Access
Right is
Read Only
, then it is available as an operand for the
get
and
get next
operations only.
♦
Status
– This validates or invalidates the use SNMP Community String, by setting the string to
Valid
or
Invalid
. Note that setting the use of the string to
Invalid
is the same as removing the string, however, the string
remains so as to be validated at an appropriate time.
SNMP Trap Manager
From the
SNMP Agent Configuration
menu, select and enter the
SNMP Trap Manager
submenu. You will see
the following configuration screen: