Filter
Top Products
1
errDump
1-135
Telnet Commands
errDump
Display the error log without page breaks.
Syntax
errDump [-s swinst] [-p] [-a]
Availability Admin
Description Use this command to display the error log without page breaks. This
command displays the same information as
errShow, but errShow
enables you to scroll through the entries using
ENTER.
See
errShow for a description of the error log.
The output of the
errdump command includes the display of
errors/events history recorded in the persistent error log and
error/events logged in the current run time cycle. This command also
provides options to display ONLY those error/event messages that
are saved in the persistent error log, or ONLY those messages
generated during the current run time cycle.
All important error log messages, regardless of their message severity
level, are stored in a persistent storage as they are logged. Both the
persistent error log and the run time log are limited in space and
managed as circular buffers. When either log overflows, old entries
are replaced by new entries.
The persistent error log is saved across system reboots and power
cycles and can be resized at run time.
When this command is executed from the Standby CP of an ED-12000B, the
switch instance number operand is required. The switch instance number is
supplied by specifying the -s swinst operand. This operand is not
required when logged into the Active CP.