Filter
Top Products
1
1-142
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
Operands This command has the following operands:
Example The following illustrates entries in the error log:
switch:admin> errShow
Error 14
--------
0x304 (fabos): Jun 14 11:57:52
Switch: 0, Warning FW-STATUS_SWITCH, 3,
Switch status changed from HEALTHY/OK to
Marginal/Warning
3844
3845
3846
3847
384F
385F
3870
3871
3874
Table 1-9 Error Codes for v4.0 (continued)
Entry Description
-s swinst
This is an optional parameter to specify a switch
instance number in a Silkworm 12000 switch. This
parameter is required on the Standby CP. This
parameter should not be used on the Active CP. You
must follow -s with the switch instance number
where the command is to be executed. Valid values
for switch instance are 0 (for the switch instance
associated with slots 1 through 4) or 1 (for the
switch instance associated with slots 7 through 10).
-p Display messages from the persistent error log.
-a Display messages from the active error log. This
displays the error log messages generated during
the current run time cycle.