Filter
Top Products
1
1-378
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
qloopCreate
Create a QuickLoop.
EMC does not support this command.
Syntax qloopCreate "qloopname", "member;member"
Availability Admin
Description Use this command to create a QuickLoop.
A QuickLoop name must begin with a letter and be followed by any
number of letters, digits, and underscore characters. Names are case
sensitive, for example “Qloop_1” indicates a different QuickLoop
than “qloop_1”. Blank spaces are ignored.
The QuickLoop member list must have one or two members; an
empty list is not allowed.
When a configuration is enabled, all QuickLoops defined in the
configuration must resolve to a maximum of two switch worldwide
names.
Zone alias names entered as members of this QuickLoop must be
defined with WWNs. Zone alias names that are defined by domain
and port number, or AL_PA are not accepted as members of the
QuickLoop.
This command requires a Zoning license.
Operands The following operands are required:
qloopname
Specify the name of QuickLoop to be created, in
quotation marks. The qloopname cannot be
used for another zone object.
member
Specify a list of members to be added to
QuickLoop, in quotation marks, separated by
semicolons. Include one or more of the
following:
◆ World Wide Names
◆ Zone alias names