Filter
Top Products
1
1-276
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
perfAddIPMonitor
Add a filter-based monitor for IP frame count.
Syntax
perfAddIPMonitor [slotnumber/]portnumber[, "alias"]
Availability Admin
Description Use this command to define filter-based monitors to count the
number of IP traffic frames.
After a successful execution of this command, a monitor number is
displayed. The monitor number is provided for easy manipulation of
these filter-based performance monitors. The optional user-defined
alias is also displayed if one was specified. All valid monitor
numbers and user-defined aliases can be displayed with the
perfShowFilterMonitor command.
There is no need to define multiple IP frame monitors on a port.
This command requires a Performance Monitoring License.
Operands This command has the following operands:
slotnumber
Specify the slot number in an ED-12000B switch. The
slot number must be followed by a slash ( / ) and the
port number.
The ED-12000B has a total of 10 slots counted from 1 to
10. Slot number 5 and 6 are control processor cards, and
slot 1 through 4 and 7 through 10 are switch cards. On
each switch card, there are 16 ports counted from the
bottom 0 to 15. A particular port must be represented
by both slot number (1 through 4 or 7 through 10) and
port number (0 through 15).
This operand is not required for switches that do not
have blades.