Filter
Top Products
1
portShow
1-357
Telnet Commands
portShow
Display port status.
Syntax
portShow [slotnumber/]portnumber
Availability All users
Description Use this command to display status information for a port.
Information varies with the switch model and port type. The display
is shown in Table 1-28:
Table 1-28 PortShow Display Fields
Field Description
portFlags
Bitmap of port status flags.
portType
Port type and revision numbers.
portState
Port SNMP state:
On ine — up and running
Offline — not online, portPhys gives details
Testing — running diagnostics
Faulty — failed diagnostics
portPhys
Port physical state:
No_Cardno — interface card present
No_Moduleno — module (GBIC or other)
present
No_Lightmodule — not receiving light
No_Syncreceiving — light but out of sync
In_Syncreceiving — light and in sync
Laser_Fltmodule — is signaling a laser fault
Port_Fltport — marked faulty
Diag_Fltport— failed diagnostics
Lock_Ref — locking to the reference signal
portScn
Last state change notification for port.