Filter
Top Products
System Application Guide SAG581126000
Spec. No. 581126000 (Model 700
NVBA) Issue AD, November 23, 2009
Page 25 of 123
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
List 50: Rectifier Module (PCU)
Features
♦ Provides one (1) Model R24-2500, Spec. No. 1R242500, Rectifier
Module (PCU).
♦ Refer to Power Data Sheet
PD588705100/PD588705101/PD588705102/PD588705103/
PD588705104 for more information.
Restrictions
For use in Spec. No. 588705100, 588705101, 588705102, 588705103, or 588705104 Module Mounting
Assemblies.
Ordering Notes
1) Order as required.
List 60: DC-DC Converter Option Interface Component Kit
Features
♦ Provides components to add DC-DC Converter capability to one (1)
8-position Module Mounting Shelf in a Module Mounting Assembly.
With one (1) List 60 installed, the four middle mounting positions in an
8-position Module Mounting Shelf in the Module Mounting Assembly
will accept DC-DC Converters or Rectifier Modules (PCUs).
♦ Includes cables for connection of converter output to a dual voltage
bus distribution panel assembly.
Restrictions
MUST be factory installed only.
CANNOT be used in Supplemental Bays.
Must be used in conjunction with a dual voltage bus distribution panel
assembly (List
JA, JB, JC, JD, KA, LB, or LC). Up to two (2) converter kits
can be used with a List JA, JB, JC, JD, LB, or LC. Up to four (4) converter
kits can be used with a List KA.
Total rectifier output power available for customer loads is reduced by the input power of each DC-DC
Converter Module installed.
Ordering Notes
1) Order one (1) List 60 (DC-DC Converter Option Kit) for each 8-position Module Mounting Shelf in which
DC-DC Converters are required (see restrictions above). Note that some Module Mounting Assemblies
consist of multiple 8-position mounting shelves. The kit permits the middle four (4) positions in an
8-position Module Mounting Shelf to accept DC-DC Converter Modules or Rectifier Modules (PCUs). List
60 is factory installed within the 8-position Module Mounting Shelf. Multiple List 60 kits will be installed
starting with bottom 8-position Module Mounting Shelf in the Module Mounting Assembly and working up.
Note that Supplemental Bays CANNOT have Converter Modules.
2) Order up to four (4) converter modules (
List 62) for each List 60 ordered.
Home