Emerson SAG581126000 Power Supply User Manual


 
SAG581126000 System Application Guide
Issue AD, November 23, 2009 Spec. No. 581126000 (Model 700
NVBA)
Page 28 of 123
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
List 75: MCA Interface Ethernet Option:
WinLink Compatible + Web Interface
Features
Provides an Ethernet circuit card (P/N 524541) and associated mounting hardware.
Ethernet circuit card is WinLink Compatible and provides a Web Interface.
This option plugs into the MCA.
Allows MCA interface via an Ethernet port.
See also
WinLink Software (List 73).
Restrictions
Must be located in Main Bay (
List 1) only.
Only one interface option (List
72, 74, 75, 76, 77, or 78) can be installed.
The Ethernet card requires an MCA with firmware version 5.2.0 or later.
Ordering Notes
1) Order this option for each Power System (MCA) to be accessed via
WEB Interface.
2) Order optional Front Access Ethernet Connector Kit P/N 525110, as required. This includes an RJ45
connector, mounting bracket, and jumper that mounts in the cutout provided on the front of the MCA
Panel.
3) WinLink Software (List 73) will operate with List 75 but is not required. Internal WEB Pages are preferred.
List 76: MCA Interface Ethernet Option:
WinLink Compatible + Web Interface + SNMP
Features
Provides an Ethernet circuit card (P/N 524541) and associated mounting hardware.
Ethernet circuit card is WinLink Compatible, provides a Web Interface, and provides
SNMP.
This option plugs into the MCA.
Allows MCA interface via an Ethernet port.
See also
WinLink Software (List 73).
Restrictions
Must be located in Main Bay (
List 1) only.
Only one interface option (List
72, 74, 75, 76, 77, or 78) can be installed.
The Ethernet card requires an MCA with firmware version 5.2.0 or later.
Ordering Notes
1) Order this option for each Power System (MCA) to be accessed via WEB Interface.
2) Order optional Front Access Ethernet Connector Kit P/N 525110, as required. This includes an RJ45
connector, mounting bracket, and jumper that mounts in the cutout provided on the front of the MCA
Panel.
3) WinLink Software (List 73) will operate with List 76 but is not required. Internal WEB Pages are preferred.
Home