Emerson SAG581126000 Power Supply User Manual


 
SAG581126000 System Application Guide
Issue AD, November 23, 2009 Spec. No. 581126000 (Model 700
NVBA)
Page 78 of 123
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Bullet Nose-Type Circuit Breakers and Bullet Nose-Type Fuseholders e/w TPS/TLS Fuses
Features
Each circuit breaker (as listed in
Table 7) plugs into one, two, or three mounting position(s) on a
Distribution Bus Module containing Bullet Nose-type distribution positions.
A single fuseholder provides for installation of a 3 to 100 ampere Bussmann TPS-type or Littelfuse
TLS-type fuse (as listed in
Table 8). This fuseholder plugs into a single mounting position on a
Distribution Bus Module containing Bullet Nose-type distribution positions. This fuseholder provides a
GMT-A alarm type fuse, which operates open to provide an alarm indication if the associated distribution
fuse opens.
Restrictions
Load should not exceed 80% of device rating.
Install distribution devices from left to right, starting with the highest capacity and working to the lowest
capacity.
Caution:
A circuit breaker with a rating greater than 150 amperes SHALL HAVE an empty mounting
position between it and any other overcurrent protective device.
Ordering Notes
1) Order circuit breakers as required per
Table 7 (Bullet Nose-Type Circuit Breakers).
2) Order fuses as required per
Table 8 (Bullet Nose-Type Fuseholders and TPS/TLS Fuses). For each fuse
ordered, also order one (1) P/N 117201 bullet nose-type fuseholder.
3) When ordering 125A, 150A, 200A, or 250A circuit breakers, associated crimp lugs must be ordered from
Table 11 (Special Application Crimp Lug / Strap Combination).
Bullet Nose-Type
Fuseholder, P/N 117201
(includes Fuseholder, Alarm Fuse,
and Alarm Fuse Safety Cover)
TPS/TLS
Fuse
Alarm Fuse
Replacement
P/N 248610301
Safety Fuse Cover
Replacement
P/N 248898700
Bullet Nose-Type Circuit Breaker
Home