Filter
Top Products
Installing Printer Software and Configuring on a Network
B-5
8. See Chapter 1 for instructions on using your printer
software.
Installing Printer Software on a Macintosh
1. Make sure the printer is connected to your Macintosh as
described on the Start Here card.
2. Turn on the Macintosh and wait until is starts up fully.
3. Turn on your printer and wait until the
Ppower light stops
flashing.
4. Insert the EPSON printer software CD-ROM or
diskette 1.
5. If you’re installing from the CD-ROM, double-click the
Epson Printer Driver Installer icon. After the installation
program starts, read the license agreement and click Agree.
The click
Continue at the next screen.
If you’re installing from diskettes, double-click the
Installer icon, then click Continue at the title screen.
6. At the Installer screen, click
Install. Follow the instructions
on the screen to install your printer software.
7. At the final dialog box, click
Restart to restart your
Macintosh.
If you’re using the CD-ROM to install your printer
software, go to step 8.
If you’re using diskettes to install your printer software, go
to step 9.
8. To install your creative software, double-click these icons in
the CD-ROM folder, one at a time:
PressWriter Installer
Kai’s Photo Soap SE Installer
Then follow the instructions on the screen.
easapb.fm5 Page 5 Tuesday, March 24, 1998 1:17 PM