Filter
Top Products
When to increase your printer’s memory
The printer displays one of these status messages when you
have insufficient memory:
INSUFF MEMORY
PAGE BUFFER FULL
ADD MEMORY FOR CH X
These messages are described in more detail in Chapter 3.
You need to add memory if one of these messages appears and
you are unable to resolve the memory problem as described in
Chapter 3, “Troubleshooting,” or if the following situations
require additional memory.
P
Using an optional identity card requires at least 1.5MB
RAM.
Cl
Using the SelecType Level 2 USER INDIVIDUAL setting
requires at least 0.5MB RAM per channel. If you plan to use
more than one interface channel for the ActionLaser 1000 or
more than two interface channels for the ActionLaser 1500,
you must add at least 0.5MB RAM.
Selecting a memory chip set combination
Before adding memory, you should determine the combination
of chip sets you need to obtain the desired total RAM. Keep in
mind that the ActionLaser 1000 comes with 0.5MB RAM and
the ActionLaser 1500 comes with 1.0MB RAM.
Options 5-35