Filter
Top Products
Note:
Once you set an option, the setting remains in effect until you change
it again or turn off the printer. If you want a setting to remain in
effect even when you turn the printer off and on, you can use the
SYSTEM CONFIG. option to save Level 1 settings. See ‘MACRO”
later in this chapter. Level 2 settings are saved automatically when
you exit Level 2.
Options
This section lists all the menus and options available. Most
menus and options are the same in the different printer
emulations. However, some have a different function for each
emulation. These menus are listed in the appendix that
describes the printer emulation. See the Quick Reference card at
the back of this Reference Guide for a map of all SelecType
menus and options.
When you enter SelecType Level 1, you see one of these options:
INPUT
PAGE SIZE
COPIES
ORIENT.
FONT
STATUS SHEET
FONT SAMPLE
SUB CONFIG.
SYSTEM CONFIG.
When you enter SelecType Level
2,
you see one of these options:
FEATURE PRINT LANG.
EMULATION DENSITY
INTERFACE TONER
RX-BUFFER SIZE VERSION
USER
PAGE COUNTER
CH TIMEOUT
RITech
AUTO CONT. STANDBY
SelecType 4-7